Home > Spares & Accessories > Machine Vices Go Back
REQUEST PRICE

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • Pietro Carnaghi
  • Model:
  • MILLING GANTRY/PORTAL PIETRO CARNAGHI MOD. UNIMILL 35 CA
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:
  • N/A

DESCRIPTION

PIETRO CARNAGHI 09397 CNC SIEMENS TECHNICAL DETAILS: Distance between frames mm 3500 Maximum height between table top and spindle nose mm 1850 Working table dimensions mm 3000x16000 Working table capacity kN/m2 50 PORTAL: Portal stroke (X axis) mm 16000 Portal feed speed (X axis) mm/min 0.5-10000 Portal rapid speed (X axis) mm/min 20000 MILLING HEAD: Head section mm 480x480 Cross travel of the carriage on the crossrail - Y axis mm 4000 Vertical travel of the head - Z axis mm 1600 Spindle rotation speed in 2 ranges -1 range rpm 6-185-750 -2 range rpm 25-750-3000 Spindle motor power (S1) kW 37 Max spindle torque at 185 rpm (1st range) Nm 1900 Y and Z axis feed speed: -1 mm/min infinitely variable range 0.5-10000 Z axis rapid speed mm/min 20000 Y-axis rapid speed mm/min 40000 COMPLETE WITH: -Automatic tool clamping -Automatic clamping of accessories -3 positions tool holder disk magazine -120 positions tool holder chain magazine -TV-35 VERTICAL MILLING AND DRILLING HEAD: Type DD210 Distance between spindle and head plate mm 175 Spindle taper DIN 2079-50-AT4-CC Spindle nose DIN 2979-B50 DIN 69871-B50 shank DIN 69872-B28 tie rod Automatic head clamping on machine Head clamping force on machine daN 10000 Automatic tool clamping Tool clamping force in the head daN 1900 Spindle speed 8-3000 rpm Max power at 175 rpm kW 35 Max torque at 175 rpm Nm 1900 Input/output transmission ratio 1:1 Front flange coolant through spindle Spindle air blowing system Max bearing temperature 60 degrees -TS-35 HORIZONTAL MILLING AND DRILLING HEAD: Type DD230 Distance between spindle and head plate mm 200 Spindle taper ISO 50 Spindle nose according to DIN 2079-50 AT4 CC Automatic tool clamping DIN 6987-B50 shank DIN 69872-B28 tie rod Spindle speed 6-3000 rpm Automatic head clamping on machine Max power at 175 rpm kW 35 Max torque at 175 rpm Nm 1900 Input/output transmission ratio 1:1 C2 axis positioning 144x2.5° C2 axis rotation speed rpm 3 Front flange coolant through the spindle Spindle air blowing system Max bearing temperature °C 60 -TVL S 400 VERTICAL MILLING AND DRILLING HEAD: Type DD280SS Distance between spindle and head plate mm 175 Spindle taper DIN 2079-50-AT4-CC Spindle nose DIN 2979-B50 DIN 69871-B50 shank DIN 69872-B28 tie rod Automatic head clamping on machine Head clamping force on machine daN 10000 Automatic tool clamping Tool clamping force in the head daN 1900 Spindle speed 8-3000 rpm Max power at 175 rpm kW 35 Max torque at 175 rpm Nm 1900 Input/output transmission ratio 1:1 Front flange coolant through spindle Spindle air blowing system Max bearing temperature °C 60 USED MACHINE
+ request more information

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

You may also be interested in these Machines

    •
      Manufacturer:
      TOS
      Model:
      BORING "T" TYPE TOS VARNSDORF
      Description:
      TOS 06972 MOD. WHQ 13 CNC CNC HEIDENHAIN iTNC 530 STROKE: -Axis X 3500 mm -Axis Y 2500 mm -Axis Z 1250 mm -Axis W 800 mm TABLE: -Rotary table dimensions mm 2200x1800 -Max table load Kg 20.000 SPINDLE: -Spindle taper ISO 50 -Spindle speed range 10-300...

      More Info

    • Manufacturer:
      Model:
      WELDING POSITIONER
      Description:
      09181 ISAM MOD. PTRK 1000 Capacity Kg 1000 USED MACHINE

      More Info

    • Manufacturer:
      MEP
      Model:
      SAW BAND MEP SHARK 320 CNC-FE
      Description:
      SHARK 07251 AUTOMATIC -0 degrees round mm 260, square mm 250, rectangle mm 320x200 -45 degrees sx round mm 230, square mm 210, rectangle mm 240x200 Blade dimensions mm 3150x25,4x0,9 Slow speed cutting mt/min 36 Fast speed cutting mt/min 72 Spindle mo...

      More Info

    • Manufacturer:
      Doosan
      Model:
      LATHE DOOSAN PUMA TT1800SY
      Description:
      DOOSAN 08905 N.2 TURRETS N.2 SPINDLES LIVE TOOLS AXIS Y CNC FANUC 18i-TB CAPACITY': Max swing diameter on the bed mm 300 Max swing diameter on the carriage mm 230 Max turning diameter from self-centering with upper turret 230 mm Max turning diameter ...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User